PSA: If you have used DJI Assistant to upgrade your M2 to V01.00.0400 or 0300 firmware on or after 07/19/2019, you will not be able to downgrade it via NLD.
Sneaky DJI has changed the .400/300 firmware on their servers and put anti-roll back into it, this was previously not enabled. They did this without telling anyone.
Signal BOOST for Mavic2x for up to between 1.6W to 1.8W signal output depending on connected devices.
NFZv2 for the .0100 Mavic2x firmware now also eliminates all NFZs hard coded into the firmware!
We have made firmware flashing free and fixed support for the M2 Enterprise.
The forums are back online! ;)
We have add FCC mode support for the .0200, .0300 and the .0400 firmwares on the Mavic 2.
NLD Forums down for maintenance
We have just released something a lot of you Mavic 2 users have been waiting for...FCC mode! GO and update NLD and get you some FCC goodness now! This is for firmware 01.00.0100, so currently users on this firmware can use the NLD Remove NFZ patch AND you can have FCC mode. Isn't life grand?
A short statement from the NLD team regarding the recent issues when flashing the Mavic Pro 2.
Since the release of NLD 1.9, we have seen a large increase in traffic over our CDN (Content Delivery Network). This is from users downgrading or upgrading their firmware to take advantage of the new M2 hacks.